Swimming Pool Construction
Exercise Pools
New York Swimming Links

  In the last two decades, a new style of pool has gained popularity. These consist of a small vessel (usually about 2.5 m x 5 m) in which the swimmer swims in place, either against the push of an artificially generated water current or against the pull of restraining devices. These pools go under several names, such as swim spas, swimming machines, or swim systems. They are all examples of different modes of resistance swimming. 
A swimming machine is a resistance swimming apparatus, often self-contained, enabling the swimmer to swim in place.
In the late 1980s the Endless Pool® was developed by James Murdock, in an attempt to build a less-expensive alternative to the [earlier built] SwimEx. This machine places the water-moving equipment - a large propeller encased in a stainless steel box and powered by a remote hydraulic pump, and its stainless steel water circulation tunnels - inside the body of a vinyl-lined metal pool. Its stream of water is narrower than that of the SwimEx, though the swimming experience is comparable. A couple of copy-cat systems have sprung up since its introduction.
Around the same time, the Swim Gym, a propeller-driven propulsion system developed by engineer Peter Davidson became available commercially. This machine is encased within a large (10" diameter) PVC tee which is then incorporated into the concrete wall of a swimming pool. It delivers a current equivalent to that produced by the Endless Pool.
A number of "still-water" mini-pools have been built over the years, designed to be used in conjunction with various resistance-swimming tether systems. These human-powered devices combine the self-contained aspect of counter-current swimming machines with the low cost and simplicity and freedom of movement of tether systems used in athletic training. They have major cost and energy-use advantages over mechanical swimming machines. They are valuable for aerobic exercise, endurance and strength training, and for stroke practice. However, they cannot replicate open water conditions, in which the water courses at speed past the swimmer, so that for competition training their use has to be combined with open-water practice. One example of such a device is the Swimergy Swim System, which also makes use of wave-reduction technology.  (Source: Wikipedia)